Assembly Instructions - Taxiing Model Aircraft

Assemble the airframe, install a small DC motor and batteries, then taxi on a smooth surface. Follow the photos—captions are concise cues.

🛠️ Time: 45–75 min 🎯 Level: Beginner–Intermediate 🔋 Power: DC motor (3–6V) + 2×AA/AAA holder or 3.7V pack 💡 Tip: dry‑fit parts before gluing

Unbox and sort all laser‑cut parts, electronics, and hardware
1📦 Unbox & sort all parts
Assemble the landing gear components
2🪵 Assemble landing gear
Install the vertical stabilizer and wing supports
3🛞 Install vertical stabilizer & wing supports
Fit the motor mount at the nose; check alignment and clearance
4⚙️ Fit motor mount
Install the battery holder and DC motor, wiring with correct polarity
5🔋 Install battery holder & DC motor (wire correctly)
Attach and align the upper wing
6🔌 Install upper wing
Fit wheels and propeller; verify smooth rolling and prop clearance
7🧷 Fit wheels and propeller
Finished aircraft on its wheels with motor installed, ready to taxi
8🛩️ Finished build · ready to taxi
Back to blog